AP 1000
9.56 метрийн өргөнтэй асфальт дэвсэх боломжтой.
| With Fixed Screed | With Extend-A-Pave Screed | With Extend-A-Pave Screed | |
| Model | AP1000 | ||
| A – Operating Height | 3.43m | ||
| A1 – Height with Tiltable Canopy | 2.73m | ||
| A2 – Shipping Height wo Canopy | 2.72m | ||
| B – Length | 6.69m | ||
| C – Operating Width | 3.16m | ||
| E – Shipping Width | 3.04m | ||
| G – Truck Dumping Clearance | 0.57m | ||
| Frame Plate Thickness | 16mm plate thickness | ||
| Prime Mover | |||
| Engine | KIRLOSKAR or Equivalent | ||
| Engine Kw | 124.3 @ 2300rpm | ||
| Electrical System | 12 VDC | ||
| Type of Cooling | Water cooled | ||
| Track | |||
| Track rail | D4 | ||
| Suspension | Three point | ||
| Track Shoe Width | 457mm(18″) | ||
| Track Shoe | Bolt on type | ||
| Track Roller | Single and Double flange type | ||
| Track Drive | Direct w/o Chain | ||
| Capacity | |||
| Fuel Tank Capacity | 172 Ltr. | ||
| Hydraulic Tank Capacity | 210 Ltr. | ||
| Performance | |||
| Weight | 22800kg | ||
| Turning radius Inner | 3.0m | ||
| Laying Capacity | 700 TPH | ||
| Paving Thickness | 10–305mm | ||
| Paving Speed m/min | 0–41 | ||
| Travel Speed Km/hr | 0–7.5 | ||
| Hopper Capacity (approx.) | 11t | ||
| Feeders | |||
| Auger | Highly Wear resisting steel casting dia. 407mm 22mm thickness | ||
| Feed tunnel Width | 762mm | ||
| Conveyor floor plate | Wear resisting steel 12mm. | ||
| Feed control system | 2 nos. On-Off type | ||
| Auger Control system | 2 nos. Proportional type | ||
| Auger lowest position from ground | 130mm | ||
| Auger Height Adjustment | 101.6 mm | ||
| Auger and Conveyor drive | Independent | ||
| Screed | F2TV 3000 | TV 5500 | TV 5900 |
| Screed Basic Width | 3.00m | 3.00m | 3.00m |
| Infinite Variable Extension | 3.00m to 5.56m | 3.00m to 6.00m | |
| Max width with bolt on Extension | 9m | 9.56m | 10m |
| Screed weight Basic | 2640kg | 4040Kg | 4570kg |
| Screed weight 9 M | 6390kg | ||
| Bolt on extension weight 1500mm eachx2 | 800kg | ||
| Bolt on extension weight 1000mm eachx2 | 595kg | 290Kg | 380kg |
| Bolt on extension weight 500mm eachx2 | 240kg | ||
| Bolt on extension weight 250mm eachx4 | 120kg | ||
| Crown | -1 to + 4.5 % | -1 to + 4.5 % | -1 to + 4.5 % |
| Gradient Slope | 10 % Gradient Slope | 10 % Gradient Slope | 10 % Gradient Slope |
| Screed Vibration | 0-30Hz | 30–50Hz | 26-40Hz |
| Tamping ( Stroke in mm ) | 0-10Hz x2 (12/9) | 18–27Hz (4) | 18-39Hz (5) |
| Screed Plate | 500mm x 15mm Wear Resistant | 400mm x 12mm Wear Resistant | 400mm x 15mm Wear Resistant |
| Screed Heaters | 18 nos. Propane | 8 nos. Propane/Diesel Optional | 8 nos. Propane/Diesel Optional |
| Controls | |||
| Operating Station | Dual Station(Swing Type) | ||
| Brake | Negative Multidisc | ||
| Sensor Device | |||
| Grade and slope control | Moba Controls | ||
| Power output | On/Off Type | ||
| Grade control measuring range | (+/-)70mm | ||
| Obtainable accuracy for grade | (+/-)1mm | ||
| Slope control measuring range | (+/-)10% | ||
| Obtainable accuracy for slope | (+/-)0.05% | ||
| Enclosure protection | IP54 | ||
| Safety devices | In built pressure relief valves | ||
| Make/type of Pumps and Motors | Sauer Danfoss or equivalent | ||
| * Suitable engine for specific export market may be offered | |||
| Maximum Performances can not be obtained simultaneously. | |||
| With Ammann Apollo’s policy of constant upgrdation of products, specifications are subject to change without prior notice | |||
| Accessories shown are optional and ae not part of the standard supply | |||
