AP 550
5.75м-ийн өргөнтөй асфальт дэвсэх боломжтой.
| Model | AP550 | |
| A – Operating Height | 3.43m | |
| A1 – Shipping Height | 2.52m | |
| A1 – Height w/o Canopy | 2.52m | |
| B – Length | 6.61m | |
| C – Operating Width | 3.14m | |
| D – Shipping Width | 2.54m | |
| E – Tread Width | 2.08m | |
| F – Truck Dumping Clearance | 0.48m | |
| G – Wheel Base | 2.61m | |
| Frame Plate Thickness | 16mm | |
| Prime Mover | ||
| Engine Make | Kirloskar | Ashok Leyland |
| Model No. | 6R1080TA1 | H6ETIC3RU23 |
| Engine Power in kw | 92 | 99 |
| Engine RPM | 2300 | 2300 |
| Electrical system | 12 VDC | |
| Type of Cooling | Water cooled | |
| Capacity | ||
| Fuel Tank Capacity | 132 Ltr. | |
| Hydraulic Tank Capacity | 190 Ltr. | |
| Performance | ||
| Weight | 14840Kg | |
| Tyre Front Solid | 4nos-22x16x12 | |
| Tyre Rear Pneumatic | 4nos-10.00×20 | |
| Turning radius inner | 5.5m | |
| Laying Capacity | 300 TPH | |
| Paving Thickness | 10-300mm | |
| Paving Speed m/min | 0-40 | |
| Travel Speed (Second) Km/hr | 0-15 | |
| Hopper Capacity (approx.) | 10t | |
| Feeders | ||
| Auger | Highly Wear resisting steel casting dia. 355mm 20mm thickness | |
| Feed tunnel Width | 590mm | |
| Conveyor floor plate | Wear resisting steel 12mm. | |
| Feed / Auger control system | 2 Nos. On/Off Type | |
| Auger lowest position from ground | 150mm | |
| Auger and Conveyor drive | Syncronised | |
| Screed | TV 4500 | |
| Screed Basic Width | 2.50m | |
| Infinite Variable Extension | 2.50m to 4.50m | |
| With Bolt On Extension Max | 5.75m | |
| Screed weight main | 2890kg | |
| Bolt on extension weight 625mm | 210kg | |
| Crown | -1 to + 4.5 % | |
| Gradient Slope | 10 % Gradient Slope | |
| Screed Vibration | 30-50Hz | |
| Tamping ( 5 mm Stroke ) | 18-27Hz | |
| Screed Plate | 320 mm x 12 mm Wear Resistant | |
| Screed Heaters | 4 nos.Diesel (Propane optional) | |
| Controls | ||
| Operating Station | Dual Station | |
| Brake | Kaliper Disc Brake | |
| Sensor for Grade and slope control | Moba Controls | |
| Sensor Device | ||
| Grade and slope control | Moba Controls | |
| Power output | On/Off Type | |
| Grade control measuring range | (+/-)70mm | |
| Obtainable accuracy for grade | (+/-)1mm | |
| Slope control measuring range | (+/-)10% | |
| Obtainable accuracy for slope | (+/-)0.05% | |
| Enclosure protection | IP54 | |
| Safety devices | In built pressure relief valves | |
| Make/type of Pumps and Motors | Sauer Danfoss or equivalent | |
| * Suitable engine for specific export market may be offered | ||
| Maximum Performances can not be obtained simultaneously. | ||
| With Ammann Apollo’s policy of constant upgrdation of products, specifications are subject to change without prior notice | ||
| Accessories shown are optional and ae not part of the standard supply | ||
